免看黄大片

Chilling Tower

  • Hydraulic Station Cooler

    Hydraulic Station Cooler

    The hydraulic station cooler is a type of cooler characterized by the use of air as a medium for heat exchange for heat exchange, and heat is carried away by air, so it is also called an air cooler.

    Email Details
  • Hot
    Hydraulic Oil Cooler

    Hydraulic Oil Cooler

    Hydraulic oil coolers are commonly used in excavators, concrete pumps, fine sand pumps, boom pumps, truck pumps, pile drivers, trenchers, rotary drilling rigs, pavers, trenchless equipment, air compressors, road rollers. Transfer the medium.

    Email Details
  • Quenching Oil Cooler

    Quenching Oil Cooler

    The oil cooling machine can prevent the working machine from affecting the accuracy due to the change of oil temperature; prevent the oil quality from changing due to high temperature, keep the viscosity of the oil unchanged, so that the working machine can work stably; the oil temperature control is based on the body temperature (room temperature) The user can set the oil temperature according to the temperature of the body to prevent the mechanical structure from generating heat and deformation. The independent oil cooler has a complete suction oil system and an independent electrical control system. As long as the oil pipe is connected, it can work with the machine tool. . The oil cooler unit is equipped with an automatic alarm function, which can promptly remind the user to repair the device in a specific way to avoid damage to the machine.

    Email Details
  • Cooling Tower

    Cooling Tower

    There must be a certain amount of surplus energy (20%-25%) in the cooling tower circulating water system, which is concentrated at a certain valve during operation, and the energy is lost in a long time. The external turbine is converted into high-efficiency mechanical energy by using these “rich energy”, so that the cooling tower fan motor can be replaced by 100% for power saving purposes.

    Email Details
  • Quenching Liquid Cooler

    Quenching Liquid Cooler

    Quenching oil cooling cooler
    During the quenching process, the temperature of the quenching oil increases after quenching, and the plate heat exchanger avoids the above problems, and the heat exchange efficiency is high and the speed is fast.

    Email Details
  • Internal Circulation Cooling Tower

    Internal Circulation Cooling Tower

    The enclosed cooling tower complete equipment consists of a main engine, a water tank, a circulating water pump and an electric control cabinet. The main machine is composed of shell, heat exchanger, fan, spray water pump, water collector, water tank and pipeline valve.

    Email Details
  • Cooling Equipment

    Cooling Equipment

    The cooling equipment has an open type and a closed type, so the cooling water circulation system is also divided into two types: open type and closed type. The design and operation of open systems is complex.

    Email Details
  • Cooler

    Cooler

    ZXZ-N Series have been developed since 2003, with cooling capacities ranging from 6 to 500 tons/ unit/ hour.
    1. the internal cycle: hot water flows from the industrial equipment into the cooling tower cooling coil, the cooling coil through the heat into the outside, after cooling the circulating water from the pump to the device.
    2. external circulation: driven by the spray pump, spray water from the sink to the sprinkler system, after the water jet cooling coil contact with the heat exchange, part of the hot steam through the fan discharge, the spray water after cooling fell to Sink again after the cycle.

    Email Details
  • Good Cooler

    Good Cooler

    ZXZ-H Series have been developed since 2003, with cooling capacities ranging from 50 to 150 tons/ unit/ hour.
    1. the internal cycle: hot water flows from the industrial equipment into the cooling tower cooling coil, the cooling coil through the heat into the outside, after cooling the circulating water from the pump to the device.
    2. external circulation: driven by the spray pump, spray water from the sink to the sprinkler system, after the water jet cooling coil contact with the heat exchange, part of the hot steam through the fan discharge, the spray water after cooling fell to Sink again after the cycle.

    Email Details
  • 1
  • 2
  • >
  • Total 15 Records
Get the latest price? We'll respond as soon as possible(within 12 hours)
免看黄大片