免看黄大片

High quality, good quality surface treatment equipment

  • Surface Treatment Equipment Manufacturers, Surface Treatment Equipment Factory, Supply Surface Treatment Equipment
  • Surface Treatment Equipment Manufacturers, Surface Treatment Equipment Factory, Supply Surface Treatment Equipment
Surface Treatment Equipment
  • Ding Heng
  • Wuxi, China
  • 20 days
  • 1000 units per year

The shot blasting equipment is first applied to the surface sanding and scale removal of cast steel and cast iron parts in the foundry industry.
Almost all steel castings, ash castings, Ma Steel parts, ductile iron parts, etc. are subject to shot blasting. This is not only to remove the oxide scale and sand on the surface of the casting, but also an indispensable preparation process before the quality inspection of the casting. For example, the large gas turbine casing must be subjected to strict shot blasting before non-destructive testing to ensure the flaw detection results. reliability.

Surface Treatment Equipment


The shot blasting equipment is first applied to the surface sanding and scale removal of cast steel and cast iron parts in the foundry industry.


Almost all steel castings, ash castings, Ma Steel parts, ductile iron parts, etc. are subject to shot blasting. This is not only to remove the oxide scale and sand on the surface of the casting, but also an indispensable preparation process before the quality inspection of the casting. For example, the large gas turbine casing must be subjected to strict shot blasting before non-destructive testing to ensure the flaw detection results. reliability. In the production of general castings, shot blasting is an indispensable process for discovering surface defects such as subcutaneous pores, slag holes, and sand, cold insulation, and peeling. Surface cleaning of non-ferrous metal castings, such as aluminum alloys, copper alloys, etc., in addition to removing oxide scales and surface defects of castings, the main purpose is to remove the burrs of the die-casting parts and obtain the decorative surface quality. , to obtain a comprehensive effect. In the production of metallurgical steel, shot blasting or pickling is a process for mechanically or chemically removing phosphorus skin to ensure high productivity in mass production of steel. In the production of other alloy steel sheets and strips such as silicon steel sheets and stainless steel sheets, annealing or pickling treatment must be performed during the cold rolling process to ensure the surface roughness and thickness accuracy of the cold rolled steel sheets.


The shot blasting machine is mainly composed of 4 parts:


1 blasting machine generally uses a high-speed rotating impeller to project the projectile in a certain direction under the action of high centrifugal force. During the working process, some blasting machines can swing at an angle or move up and down.


2 projectile collection, separation and transportation systems.


3 The carrier that continuously runs and flips the casting during the shot blasting process.


4 dust removal system.


Sandblasting room: no deep pits (or no pits), low capital cost and short construction period.


The equipment of shot blasting machine is mainly composed of blasting machine, wear-resistant rubber ring belt, auger, lifting, separator, feeding conveying, dust removing machine and cleaning machine.


Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right
免看黄大片